Few things are more annoying than seeing the error notice “Brother Printer Paper Jam” appear in the middle of a crucial print job. A jammed printer may quickly stop your work, whether you’re printing a snapshot, a business document, or a school report. Don’t panic, though; it’s frequently simpler than you may imagine to solve a paper jam in your Brother printer. We’ll walk you over the process of finding, removing, and avoiding paper jams in this comprehensive tutorial.
Comprehending the Brother Printer Paper Jam Issue
When paper becomes lodged in the printer’s paper route, a Brother printer paper jam happens. This can occur for a number of reasons, including using the incorrect type of paper, loading too much paper, or dirt blocking the rollers. You can prevent recurring problems by identifying the underlying reason.
Typical reasons include of:
- Paper trays that are misplaced or overfilled
- Paper sheets that are torn or curled
- Dust or tiny particles within the printer
- Feed rollers that are worn out
- Using different weights or sizes of paper
It’s time to look for a jammed paper problem if your printer screen shows a “Paper Jam” message or if you hear odd grinding noises.
1. Switch off the printer
Turn off your Brother printer before proceeding. To protect yourself, unplug it from the electrical outlet. While the printer is running, attempting to remove stuck paper might result in harm or damage to internal parts.
2. Make Every Access Point Open
There are usually several places on Brother printers where paper might get caught. These consist of:
- The tray of paper
- The rear cover, often known as the rear jam clear cover
- The region of the toner cartridge
- The front lid or output slot
Open each of these spaces lightly to begin. For model-specific instructions, consult your printer’s handbook.
3. Take the jammed paper out of the paper tray.
Remove the paper tray with caution. If a piece of paper appears to be stuck close to the tray, carefully remove it without tearing. If the paper seems stuck, don’t remove it from the front since this might make the jam worse. Try pushing it toward the paper stream instead.
Check for any little paper bits that may have been left behind subsequently removed. Another “brother printer paper jam” issue can be caused by even minute particles.
4. Examine the rear access cover.
The majority of Brother printers include a jam-clear lid or rear access door. Check for any debris or stuck sheets by opening this panel. Use both hands to carefully and evenly remove any paper that may be lodged within.
After the jam is removed, validate that the rollers spin freely. Use a lint-free cloth that has been slightly inhibited with water to clean them if they appear sticky or unclean.
5. Examine the Toner Cartridge Area
Carefully remove the toner cartridge and drum unit assembly by lifting the front cover. Check for any stuck paper inside. Gently pick out any pieces you find in the direction of the paper trail.
- The drum surface is delicate and easily damaged, so be careful not to touch it.
- After finishing, put the toner and drum back into the printer.
6. Examine the Duplex Unit and Output Tray
Paper can occasionally become trapped inside the duplex (double-sided) printing unit or right before it leaves the printer. Check for any jammed paper by opening the duplex tray, if one is provided. To prevent harming the internal rollers, remove it carefully.
Once all potential spaces have been cleared, firmly shut all covers until you hear them click into position.
7. Correctly reload the paper
Take time to properly reload the paper before continuing to print.
Here’s how to do it correctly:
- To keep sheets from adhering, fan the paper stack.
- Evenly align the edges.
- Just load as many sheets as advised.
- Don’t bend the paper; instead, firmly fine-tune the paper guides against the paper.
These minor actions can significantly lower the likelihood that another brother printer paper jam fix will be required in the near future.
8. Examine Your Printer
Turn on the printer by plugging it back in. To validate that everything is working correctly, print a test page. Validate that there are no pieces of paper left inside if the problem notice persists.
Try updating the firmware or restarting your printer if the problem continues. Sometimes, even when there isn’t any paper physically trapped, the “Paper Jam” message might still occur, particularly following a power outage or connection problem like “Brother Printer Not Responding.”
Avoiding Paper Jams in the Future
Maintaining the functionality of your Brother printer requires prevention. Observe these upkeep guidelines:
- Make use of premium paper that satisfies Brother’s suggested requirements.
- To evade curling caused by humidity, store paper in a cool, parched location.
- Use a gentle, lint-free cloth to clean the rollers on a steady base.
- Don’t fill the paper tray too full.
- When necessary, replace worn-out components like rollers or separation pads.
To guarantee seamless communication between your device and the printer, think about doing a brother printer wireless setup check whether your printer is connected via Wi-Fi. It is important to validate that both hardware and software are in sync since connectivity problems might occasionally be mistaken for hardware problems.
Concluding remarks
It doesn’t have to be difficult to resolve brother printer paper jam. You can remove the jam, avoid other problems, and maintain the smooth operation of your printer with a little perseverance and cautious handling.
Recall that consistent upkeep and appropriate paper handling are essential to a long-lasting solution. For paper size, weight, and type, always adhere to Brother’s suggested parameters.
In addition to learning how to resolve a jammed paper Brother printer issue, this tutorial will give you the confidence to troubleshoot frequent printer issues. And you’ll know just what to do the next time you receive that dreadful “Paper Jam” message.
FAQs
What should I do if paper keeps jamming in Brother printer?
Use the right kind of paper, wipe the paper rollers, look for any residual pieces, and reload sheets correctly. Worn rollers or improper paper settings might be the cause of persistent clogs.
Can a paper jam damage my Brother printer?
Indeed, internal rollers, sensors, or gears may be harmed by frequent or severe paper removal. To avoid decrementing the printer, always turn off the power before removing jams and carefully remove paper.
Can using the wrong paper cause Brother printer jams?
Of course. The chance of jamming is increased by using thick, curled, or wet paper. For seamless, jam-free printing, always use paper that is the size, weight, and quality that Brother recommends.
How to remove tiny scraps of paper that get stuck inside a Brother printer?
Turn off the printer, remove all covers, remove tiny particles with tweezers or compressed air, and then carefully clean the rollers. Before printing again, always validate that there are no pieces left.